Used Ice Boats & Components For Sale
If you would like to list an ice boat or component on this page,
please email to the webmaster and it will be posted.
Vintage iceboat: Has not been used in many years. Sail needs repaired or replaced.
Quincy, Michigan 49082
(517) 238-4836 firstname.lastname@example.org
Carbon fiber mast and boom
Custom Doyle Sail and sail cover
Carbon fiber on springboard and plank
Carbon fiber on cockpit and on hull bottom
Custom leather seat
Stern steering wheel
Vinyl travel bags for all parts
$9,950.00 $7500.00 $6950.00
Contact Kevin Sherry (313) 570-3544
1/4 Insert runners. With 5160 hardened carbon steel. These runners are very hard, strait and fast.
$600 for the pair.
I have a bunch of extra miscellaneous parts including: side stay adjusters, mast steps & mast step plates, Harken pullies, tangs, shroud triangles, steering rod, Sherry DN tiller, etc. - make an offer.
Located in Minnesota.
revans at mastersofsail dot com
I have two C2 DN Rocket masts for sale. Both are great masts, I do not need four. $1100 each. Located in MN. Available at Western Challenge. JD@Dennisinv.com
in New Hampshire
Own a piece of Iceboat history! Early 1900 Palmer Class D Lingwes for sale.
Described in 1938 book ,”Wings on the Ice”, by Frederic Gardiner, pgs 131 – 133. Click here to read
Front steerer, Wheel and tiller steering
Two sets of runners (ice and snow)
350 lbs without crew
Located in Hanover, NH
Nearest to $6,000 gets it.
Please call or email Denis for more photos, information or to schedule viewing 802-785-2082 email@example.com.
If leaving a message please speak loudly & distinctly REPEAT YOUR PHONE NUMBER TWICE as I am hearing impaired. When emailing, include your phone number, thank you.
Hull: Goodwin Plans, Full Size Cockpit
Sails: North Sails – ABSS, Quantrum F01
3 - Stainless angles (Polish made)
3 - Stainless slipper snow runners
2 - Insert runners, ¼” x 36” w/stiffeners (carbon fiber)
2 - Insert runners, 3/16” x 36” carbon fiber (Ron Sherry)
2 - Insert runners, 3/16” x 36” carbon fiber, no wings
3 - Stainless bull nose
Steering runners : 30” 3/16” low profile
32” x ¼” low profile
26” x ¼” low profile
Runner boxes: 2 – Waterproof gun cases
In New Jersey
Call Doug @ 732-861-7415
Older model DN. All wood with spruce runner plank and wooden mast.
In good condition, recently reglued and rescrewed. Includes original
sail and tackle. Runners need to be sharpened but with a fresh coat of
paint to freshen it up, it’s ready to start the season.
Ideal Starter Boat
Stored in Muskegon, MI.
Contact “Joe” at 231-744-3436
DN for sale, it’s only seen the ice a few winters and has been carefully stored otherwise. Sarns runners and rigging, Fisher sail in “like new” condition, blade sharpener, covers for everything, ready to sail, Located in Southeastern Michigan. $2,200.
(734) 678-8280; firstname.lastname@example.org.
Complete with Sarns Runners, carbon fiber Sherry Mast, fast boat in excellent condition. $2,500.00 firm. Call 262-949-8442 or email email@example.com
Side by Side 2 passenger Iceboat
Side by Side 2 passenger Iceboat, Wood Mast, Complete $800.00 firm.
Call 262-949-8442 or email firstname.lastname@example.org
Nite two-person iceboat, red, with sail and runners. All in good condition. $5000 or best offer. email@example.com is best way to contact me.
Sherry Whip Spar, EC $975
1D 2000 "Full power" sail w Rat battens and bag, very low hours EC $575
firstname.lastname@example.org Traverse City
Arrow iceboat in good condition and complete. Please call Ed
at 720-341-6443 In northern Michigan.
Two DN iceboats for sale and a trailer. Each iceboat is$1500 and the trailer is $500. I’ve never put it together but I am told all the parts are there.
For sale: 7/8th’s scale DN built in 1973 with original drawings and bills. Hull color is blue and it’s in great shape, not sure if it ever sailed. Would make a great boat for kid or small adult. Sell outright or trade boat and Alum. DN mast for newer carbon/epoxie mast. Located in Michigan. Eric@cdxholland.com
CONTACT: Lea email@example.com
Reinforced and rebuilt Nite hull #36 in perfect condition with amazing handcrafted paint.
1 North Sail (sailed twice)
1 Doyle sail (sailed twice)
Norton spruce mast natural (sailed 6 times in moderate conditions)
Reinforced springboard and plank natural
2 boxes of Sarns runners
Trailer (rebuilt and reinforced) with 13” wheels & new lock box Stored inside with trailer
$6000 if buyer picks up.
$6500 if I have to arrange delivery.
CONTACT: Lea firstname.lastname@example.org
For Sale -- "Ice Flyer" Ice Boat
Complete package ready to sail including fiberglass hull, windsurf sail & bag, "Sarns" blades with box, tripods, videos & rigging instructions, a transfer dolly and two helmets w/face shields. Great condition! Asking price $2,000.
Developed by Wally Hall, an ice boating enthusiast in Colorado, this boat design places the sailor in a comfortable upright seated position with foot pedal steering and a single sheet line to control the boom/sail. Since the boom is behind the sailor, tacking is effortless and safe; with foot pedal steering, turns are sharp and precise. Top speeds range from 2 to 3 times the wind speed.
1961 Thompson 17-1/2' Sea Lancer, on a tilt trailer, with a cast-iron Johnson 75HP vertical "V" outboard.
Outer hull was redone, epoxy impregnated, and painted with 4 coats of West Marine Topcoat.
Decks still need some work (minor), interior need minor work and painting on sole.
Inside of hull is oiled and all brightwork, seats, dash, sanded and varnished.
Trailer is in good condition w/ fairly new tires, needs paint.
Engine turns freely, but have not had engine running - all electronics are there.
Window frames have been sanded and varnished, all glass is there (one broken), may be missing minor hardware.
I do have pictures but they are on my computer in Wyoming - the boat is also located in Wyoming at the moment.
I will be headed back to Wyoming in late April to retrieve my stuff - could deliver anywhere along the route.
Will post pictures as soon as I can get to them - call for more information.
Want to trade for good condition ice boat - I stand 6'4" and mass out about 260#, need one that "fits."
Contact for more information; Len Payne 231-675-6664
DN For Sale in SE Michigan
Hull built 2013. Sitka spruce min wt, Sarns hardware, new wire set staymaster, struble hound, sailed once. Glass whip mast, Doyle F01 sail, Alum boom harken blocks, telescoping tiller, 440c stainless 1/4 " inserts, set of 26" Sarns plate snow runners. Plank set for 160 lb.
Ready to race, very competive
Available til approx Thanksgiving-heading south for winter.
10 Meter Stern-Steer Iceboat For Sale
Polar Bear 10 Meter stern-steer iceboat. This boat can accommodate two sailors. The iceboat was originally named “Red Bird”. It has been completely restored and is ready to be sailed. Most of the hardware has been upgraded. Custom trailer with new tires. I am an avid iceboater and retired shop teacher who does this as a hobby. Pictures of this iceboat are available for interested buyers. Harrison TWP, Michigan, on Lake St. Clair.
Arrow For Sale in New York
Arrow #353 for two, side by side.
Carbon fiber spring board, newer runners (used twice), newer stays, cockpit cover, full mast up top cover, jack stands, and aluminum spars.
Trailer carries all gear.
Located Finger Lakes, NY.
DN For Sale in Detroit
DN hull, plank, tiller, and runners. No mast or sail. I've never sailed it. Extra set of chocks. Stored in heated garage.
Original C2 Whip Mast For Sale
FOR SALE: Original "whip" mast and Doyle FO1 sail. Both stored indoors for 10 years prior to being sailed the past 6 years and are in excellent condition. I have never used a mast hound spreader bar on this mast, but still reinforced it for reassurance. Lower luff of sail is currently being repaired at Dieball Sails for the next owner. Gold fleet race record at Worlds and NA's in 2013. Both are located in Toledo, Ohio. Can make arrangements to deliver to most regattas.
$1200 for the mast and
$500 for the sail.
$1600 for both!
Gougeon Style Hull with Hiking Rack
2 Wood Masts ,Goodwin Design: 1 Redwood ,1 Ash/Redwood
2 Sails, 1 Doyle , 1 North (Both Sherry Made)
2 Set Runners, 1 set Sarns Bullnose, 1 set 440c Stainless Inserts
3 Planks: Sarns Chocks on one, Hamel Chocks on the other, no hardware 3rd.
Runner Alignment plates.
Covers for Masts, Runner bag for inserts, and Full Transport Bag for Hull.
Hull, Masts, and Planks all constructed in Paul Goodwin’s shop with expert guidance from Paul and Ron Sherry.
Excellent Condition, Everything you need to get started Iceboating this Winter!
Late model DN, Hamill hull, Sarns
equipped plank (175-200#), bullnose
plates, glass whip spar, new FO1 sail
, Harken equipped custom Al boom,
custom telescoping tiller, Sta-master
wire set, clean complete boat shows
or may part.
I currently have a Whip composite mast for sale.
I have two Composite Concepts DN masts for sale.
Original "Whip" mast $1000
"Rocket" mast $1200
Tom Hammil DN in Michigan
Tom Hammil Hull, plank, stripper mast, Shore Wide Range sail, and two sets of Sarns Plate Runners. $2600.00
Contact Ron Sherry 586-790-5557 email
1957 Boston Sails DN in Michigan
Original DN #165. The sail was built by Boston Sails in 1957. The boat comes with Plate and Angle runners. The boat is complete
and ready to sail. The finish is excellent. It would be a good boat for a museum. $800.00
Contact Ron Sherry 586-790-5557 email
Arrow iceboat for sale $1,700.00, boat is in good condition and comes with the following equipment. Aluminum mast and boom, complete set of runners, sail in excellent condition and comes with a sail bag. Also included is the plank, which is also in good condition plus the boat has a compete canvas cover. all running rigging is included this boat is ready to sail. the boat is located in Harrison Township, near Mount Clemens, Michigan.
Arrow 2 person ice boat, sail #285. Very good condition with brand new plank, Sarns runners, aluminum mast and boom. Located Boyne City, MI.
Hull has Sarns steering, adj. mast step, tiller, Harken blocks, bob stay but no bob stay post and no hull plates to attach the plank. Cockpit floor is slotted for internal plank attachment. Runner plank has stud plates, Sarns chocks, and tang. Aluminum boom has Harken blocks, jaw, adjustable outhaul, and mainsheet line. Wood mast has glass and carbon reinforcment, aluminum sail slot, 3-dimpled mast base, halyard, hound.
There is no rigging, no runners, no sail.
Asking $995.00 f.o.b. Williams Bay.
Sale is "as is" with no guarantees and no warranty.
Composite Concepts Rocket Mast
For Sale: DN Ice Boat
Hull built by Ron Sherry in 2000. Boston sail. Complete rig, just add ice!
Enclosed trailer built in 2002.
Boat and gear in pristine condition. Trailer needs a little TLC.
Located in St. Clair County.
$8,500 $4,500 - OBO.
Stephen @ 586-747-9315 or email@example.com
For Sale: Vintage Stern Steerer
Moving south and need to sell this vintage Stern Steerer.
$650. Located in Detroit area.
- One Burczynski DN stripper mast, black $300
- One REX Boston $300
- One Doyle Boston $300
I have a Yankee B Skeeter for sale. The hull was rebuilt, it has cast iron runners, 20' mast, and a 16' 8" runner plank. Located in New Jersey.
$3,800 or best offer.
The following DN components belonged to Wendell Sherry and are available for purchase:
2 1/4 440c prepreg side inserts w/aluminum wings c2
1 runner case strong $100.00
All checks made out to Helen Sherry, sent to:
Lombard Il 60148
"Helen is very glad to know that Wendell's toys are going to be used. All equipment is at Composite Concepts and will be delivered to events, or shipped."
Dick Wollam of Michigan has two complete DNs for sale. You can add or subtract components to make a full race or cruising package.
Contact Dick at 231-620-5169.